120cells Half Cut PV Module 350w 360w 370w 380w Solar Panel 9BB Mono 
	
	Specification of 9BB Half Cut Solar Panel 120cells Monocrystalline 
	
 
	
		
			
				
					PV Module 
				 | 
				
					GSM350-120 
				 | 
				
					GSM360-120 
				 | 
				
					GSM370-120 
				 | 
				
					GSM380-120 
				 | 
			
			
				
					Rated Maximum Power(Pmax) [W] 
				 | 
				
					350 
				 | 
				
					 
						360 
					 
				 | 
				
					370 
				 | 
				
					380 
				 | 
			
			
				
					Open Circuit Voltage(Voc) [V] 
				 | 
				
					40.5 
				 | 
				
					40.9 
				 | 
				
					41.3 
				 | 
				
					41.7 
				 | 
			
			
				
					Maximum Power Voltage(Vmp) [V] 
				 | 
				
					33.3 
				 | 
				
					34.7 
				 | 
				
					36.1 
				 | 
				
					37.5 
				 | 
			
			
				
					Short Circuit Current(Isc) [A] 
				 | 
				
					11.02 
				 | 
				
					11.2 
				 | 
				
					11.38 
				 | 
				
					11.56 
				 | 
			
			
				
					Maximum Power Current(Imp) [A] 
				 | 
				
					10.52 
				 | 
				
					10.69 
				 | 
				
					10.86 
				 | 
				
					11.03 
				 | 
			
			
				
					Module Efficiency [%] 
				 | 
				
					19.0 
				 | 
				
					19.6 
				 | 
				
					20.2 
				 | 
				
					20.6 
				 | 
			
			
				
					Power Tolerance 
				 | 
				
					0~+5W 
				 | 
			
			
				
					Temperature Coefficient of Isc(α_Isc) 
				 | 
				
					+0.058%/℃ 
				 | 
			
			
				
					Temperature Coefficient of Voc(β_Voc) 
				 | 
				
					-0.330%/℃ 
				 | 
			
			
				
					Temperature Coefficient of Pmax(γ_Pmp) 
				 | 
				
					-0.400%/℃ 
				 | 
			
			
				
					STC 
				 | 
				
					Irradiance 1000W/m²,ᅠcell temperature 25℃, AM1.5G 
				 | 
			
			
				
					Size  
				 | 
				
					1776*1052*35mm 
				 | 
			
			
				
					Weight  
				 | 
				
					20kg 
				 | 
			
		
	
 
	
	Production ofHalf-cut Solar Panel 
	
 
	
	Package forHalf-cut Solar Panel 
	
 
	27units to 30unitshalf-cut cells solar panelin one wood pallet 
	10pallets solar panels in a 20ft container 
	23pallets pv modules in a 40ft HQ container 
	Customization Packageis Feasibility 
	
	Half-cut Cells Advantages 
	
 
	(1) The solar cell is divided into two, the main gate current is halved, the current loss of the whole component is reduced to 1/4 of the original, and the output power is about 5-10W higher than that of the same type of whole battery assembly.
 (2) The hot spot temperature of the half-chip module assembly is lower than the temperature of the same-type full-piece module
 assembly by about 25 ° C, which can effectively reduce the hot spot effect of the component.
 (3) Half-cut module components meet the 1500V system voltage design requirements, which can reduce the system-side cost by about 10%;
 (4) Effectively reduce the loss of power generation caused by occlusion when there is shadow occlusion and ash accumulation or snow accumulation.
 (5) Reduce the first year and the average photoinduced attenuation;
 (6) 100% PID Free. 
	
	On grid solar system connects to grid, self consumption first,excess power can be sold to the grid. 
	Grid tie solar system mainly consists of solar panels, grid tie inverter, brackets, etc. 
	
	Energy Storage Solar System can connect to grid, self consumption first, excess power can be stored in the battery 
	Hyrid solar system mainly consists of pv modules, hybrid inverter, mounting system, battery,etc. 
	
	Stand alone solar system works alone without city power 
	Off grid solar system mainly consists of solar panels, off grid inverter, charge controller, solar battery, etc 
	
	One stop solution for solar power system, solar water pump system.  
	For more information, please feel free to contact our team  
	Email: peter@greensunpv.com 
	Whatsapp: +86 186 5699 5254